Ricoh D127 Field Service Manual page 406

5. Appendix: Fax Service Program
5 On hook dial
0: Disabled 1: Enabled
6-7 Not used
System Switch 0B - Not used (Do not change the factory settings.)
System Switch 0C - Not used (Do not change the factory settings.)
System Switch 0D - Not used (Do not change the factory settings.)
System Switch 0E [SP No. 1-101-015]
No
0-1 Not used
2 Not used
Memory storing while the handset
used Enabled/Disabled selection
3
[0: Disabled 1: Enabled]
4-7 Not used
System Switch 0F [SP No. 1-101-016]
No
198
FUNCTION
FUNCTION
0: On hook dial is disabled.
Do not change the factory settings.
COMMENTS
Do not change the settings.
This machine does not have the capture function.
Manual receive is disabled while this function is Enabled
(1).
Do not change these settings.
COMMENTS