Ricoh D127 Field Service Manual page 272

3. Appendix: SP Mode Tables
Monitor Interval
003
Sets the processing time interval for referencing user ID and password information.
[1 to 10/3/1 sec.]
5417 Access Attack
Access Permissible Number
Sets a limit on access attempts when an excessive number of attempts are detected for
001
MFP features.
[0 to 500/100/1]
Attack Detect Time
002
Sets the length of time for monitoring the frequency of access to MFP features.
[10 to 30/10/1 sec.]
Productivity Fall Wait
Sets the wait time to slow down the speed of certification when an excessive number of
003
access attempts have been detected.
[0 to 9/3/1 sec.]
Attack Max Num
Sets a limit on the number of requests received for certification in order to slow down the
004
certification speed when an excessive number of access attempts have been detected.
[50 to 200/200/1 attempt]
5420 User Authentication
These settings should be done with the System Administrator.
Note: These functions are enabled only after the user access feature has been enabled.
Copy
Determines whether certification is required before a user can use the copy applications.
001
[0 to 1/0/1]
0: On
1: Off
64