Ricoh D127 Field Service Manual page 429

No FUNCTION
0-7 IP-Fax dial interval setting
Communication Switch 0A [SP No. 1-104-011]
No FUNCTION
Point of resumption of memory
transmission upon redialing
0
0: From the error page
1: From page 1
1-7 Not used
Communication Switch 0B [SP No. 1-104-012]
No FUNCTION
0-3 Not used
Received file output ON/OFF
selection for multiple relayed
4
communications.
0: OFF 1: ON
5-7 Not used
Communication Switch 0C – Not used (do not change the settings)
Communication Switch 0D [SP No. 1-104-014]
No FUNCTION
COMMENTS
Adjusts the interval of the IP-fax dialing.
The interval of IP-fax dialing is calculated by following
formula.
[Interval time = specified value with this switch x 2 sec]
COMMENTS
0: The transmission begins from the page where
transmission failed the previous time.
1: Transmission begins from the first page, using normal
memory transmission.
Do not change the settings.
COMMENTS
(do not change the settings)
Determines whether received file(s) is printed out or not
by the relaying copier on multiple relayed
communications.
Do not change the settings.
COMMENTS
Bit Switches
221