Fax Switches - Ricoh Aficio 1515 Service Manual

9 March 2004

3.2.6 FAX SWITCHES

FAX Switch 00 - Not used (Do not change the settings.)
FAX Switch 0A - Not used (Do not change the settings.)
FAX Switch 0B
No FUNCTION
0
Scan margin setting (right and left margin in book scan ADF mode)
to The setting can be between 0 and F (H) (unit 0.5 mm).
3 Default setting: 2 mm
4 Scan margin setting (top and bottom margin in book scan and ADF mode)
to
The setting can be between 0 and 7 (H) (unit 0.5 mm).
7 Default setting: 3 mm
FAX Switch 0C
No FUNCTION
0
Action when an original jam has
occurred while scanning the original
into memory for memory tx
0: Continues scanning after
recovery
1: Stops scanning and erases all
scanned pages for that job
1-7 Not used
FAX Switch 0D - Not used (Do not change the settings.)
FAX Switch 0E
No FUNCTION
0 Not used
1 Scan resolution unit
0: mm
1: inches
2-7 Not used
FAX Switch 0F - Not used (Do not change the settings.)
:
:
This bit is only effective when parallel memory tx is
disabled (user parameter 07 - bit 2).
If parallel memory tx is enabled, the machine always
erases the scanned pages when an original jam
occurs. The machine then asks the user to retry from
the first page, even if the parallel memory tx is not
actually used.
0: The machine displays a message asking the user to
put the jammed page back into the original stack, and
continues scanning.
The message is displayed for the time period specified
by scanner switch 0E, bit 2.
1: The machine erases all the scanned pages and
asks the user to retry from the first page.
Do not change the settings.
Do not change the settings.
This bit determines which resolution unit will be
used for scanning a fax message.
Default setting: mm
Do not change the settings.
3-35
BIT SWITCHES
SP No. 3-201-012
COMMENTS
SP No. 3-201-013
COMMENTS
SP No. 3-201-015
COMMENTS