Ricoh D127 Field Service Manual page 231

Thresh: delta t
The environment judge takes place as follows:
Compared with "S1" and "S1+Delta t", the environment temp. is...
(S1: SP1105-014 value / Delta t: This SP's value)
1105 15
S1
S1+Delta t
Judged as
1105 16 Low: Plain1
1105 17 Low: Plain2
1105 18 Low: M-Thick
1105 19 Low: Thick
1105 20 Registration Waiting: Plain1
1105 21 Registration Waiting: Plain2
1105 22 Registration Waiting: M - Thick
1105 23 Registration Waiting: Thick
1105 24 Waiting: Center Minus: Plain1
1105 26 Waiting: Center Minus: Plain2
1105 28 Waiting: Center Minus: M - Thick
1105 30 Waiting: Center Minus: Thick
[0 to 50 / 0 / 1 °C/step]
Less or equal
Less Less or equal
Low temp. Normal temp.
[0 to 30 / 5 / 1 °C/step]
Sets the additional degree for each paper
type
environment.
*Refer to SP1105-015 about the environment
judge.
[0 to 30 / 10 / 1 °C/step]
The same function as SP1105 (-017 to -18)
[0 to 1 / 1 / 1 /step]
(0: OFF / 1: ON)
Registration waiting means keeping fed paper
in the registration part until fusing unit is ready
to work.
[0 to 60 / 30 / 1 °C/step]
Subtracting
SP1105-001,002. The sum at which or less,
registration waiting starts.
[0 to 60 / 10 / 1 °C/step]
The same function as SP1105 (-024, -26)
System Service Mode
Greater Greater
Greater
High temp.
printing under low
temp. applying
temperature
to
23