Contact-Release Solenoid; Toner Supply Motor - Ricoh D127 Field Service Manual

4. Replacement and Adjustment

Contact-Release Solenoid

1. Rear cover (
2. High-voltage power supply board (
3. Contact-release solenoid [A] (1 spring,

Toner Supply Motor

1. Toner bottle holder
2. Hold both sides of the Toner Supply Clutch [A] as the red arrows show. Then pull to your side with
trying to release the upper hook the red square shows.
3. Remove the harness the red circle shows.
116
p.78 "Rear Cover")
p.114 "High-Voltage Power Supply Board ")
x 1)