Table of Contents
Advertisement
Main scan: 400 dpi, 200 dpi
Resolution:
Sub scan: 400 dpi, 200 dpi, 100 dpi
To use 400 dpi, IFAX SW01 Bit 4 must be set to "1".
1 s (through a LAN to the server)
Condition: ITU-T #1 test document (Selerexe Letter)
MTF correction: OFF
TTI: None
Transmission Time:
Resolution: 200 x 100 dpi
Communication speed: 10 Mbps
Correspondent device: E-mail server
Line conditions: No terminal access
Maximum message width is A4/LT.
Document Size:
Single/multi-part
E-mail File Format:
MIME conversion
Image: TIFF-F (MH, MR, MMR), JBIG
Transmission:
SMTP, TCP/IP
Protocol:
Reception:
POP3, SMTP, IMAP4, TCP/IP
100 Mbps(100base-Tx)
Data Rate:
10 Mbps (10base-T)
SMTP-AUTH
Authentication
POP before SMTP
Method:
A-POP
Remark:
The machine must be set up as an e-mail client before installation. Any client
PCs connected to the machine through a LAN must also be e-mail clients, or
some features will not work (e.g. Autorouting).
• To use B4 and A3 width, IFAX SW00 Bit 1 (B4) and/or Bit 2 (A3) must
be set to "1".
Specifications
11
Advertisement
Chapters
Table of Contents
Troubleshooting
