1. Push the spring [A] located on the opposite side of the scanner motor [B] to loosen the belt [C] from
the scanner motor gear.
2. Remove the screws on the top of the scanner motor [B] (
3. Turn the scanner motor [B] back. Then remove the screws and the harness on the back (
x1).
Scanner HP Sensor
1. Rear cover (
p.78 "Rear Cover")
2. Scanner Cover and Exposure Glass (
3. Two of the brackets [A] [B] and the rail [C] (
4. Scanner HP sensor [D] (
Scanner Cover and Exposure Glass)
x 6)
x 1,
x 1)
x 4).
Scanner Unit
x 2
85