Ricoh D127 Field Service Manual page 281

CommLog Print
250
Prints the communication log.
5824 NVRAM Upload
5824 1 "NVRAM Upload/Download" in this section.
5825 NVRAM Download
5825 1 "NVRAM Upload/Download" in this section.
5828 Network Setting
IPv4 Address (Ethernet /
001
IEEE802.11)
Subnet Mask (Ethernet /
002
IEEE802.11)
IPv4 Default Gateway
003
(Ethernet / IEEE802.11)
DHCP (Ethernet /
006
IEEE802.11)
021 Active IPv4 Address
022 Active IPv4 Subnet Mask
023 Active IPv4 Gateway Address
050 1284 Compatibility (Centro)
052 ECP (Centro)
065 Job Spooling
066 Job Spooling clear: start time
CTL
Default: 0B16212C H (011.022.033.044)
Default: 00000000 H (000.000.000.000)
Default: 00000000 H (000.000.000.000)
Determines whether DHCP IP Address Setting is used or
not.
[0: Not used 1: Used]
Default: 00000000 H (000.000.000.000)
Default: 00000000 H (000.000.000.000)
Default: 00000000 H (000.000.000.000)
[0:Not permitted 1:Permitted]
[0:Not permitted 1:Permitted]
Enables/disables Job Spooling.
[0 or 1 / 0 / 1 /step]
0: Disable, 1: Enable
Determines whether spooled job in the HDD is cleared
or printed on machine start-up.
[0: Clear 1: Print]
System Service Mode
73