Ricoh D127 Field Service Manual page 234

3. Appendix: SP Mode Tables
1124 23 High: 3rd CPM Down Time.: A6
Judging Interval
1124 24
For CPM down (Low temp.)
Start Timing
1124 25
After motor driving start, CPM down judge starts in SP's value sec later. (Low temp.)
1152 Fusing Nip Band Check By-pass
Check By-pass
1152 1
Execution type SP
Pre-idling Time
1152 2
Sets the duration of idling before the check takes place.
Stop Time
1152 3
Sets the duration of the check.
1159* Fusing Jam Detection
SC Display
Enables or disables consecutive jam detection at the fusing unit. If this SP is set to "1"
1159 1
(default: 0), consecutive fusing jam alarm occurs (SC559) when the machine detects
three consecutive paper jams at the fusing unit.
1902 Frequency
Displays the fusing lamp power control frequency (as detected by the zero cross signal
1902 1
generator).
1907 Paper Pre Feed Timing
1907 20 F2 Tray
1907 21 F3 Tray
1907 22 F2 Tray
1907 23 F3 Tray
26
[0 to 999 / 0 / 1 sec/step]
[1 to 999 / 10 / 1 sec/step]
[1 to 999 / 10 / 1 sec/step]
[0 to 999 / 300 /1 sec/step]
[0 to 100 / 20 / 1 sec/step]
[0 = No / 1 = Yes]
[-10 to 10 / 0 / 1 mm/step]
The larger value set, the larger area of the paper
is pre-fed for each tray.