Communication Switches - Ricoh D127 Field Service Manual

Smoothing feature
Bit 1: 0 Bit 0: 0 = Disabled
0-1 Bit 1: 0 Bit 0: 1 = Disabled
Bit 1: 1 Bit 0: 0 = Enabled
Bit 1: 1 Bit 0: 1 = Not used
Duplex-Print Setting
2
0: Disabled / 1: Enabled
Stapling area setting for Duplex-
3
Print
4-7 Not used

Communication Switches

Communication Switch 00 [SP No. 1-104-001]
No FUNCTION
Compression modes available in
receive mode
Bit 1: 0 Bit 0: 0 = MH only
0-1 Bit 1: 0 Bit 0: 1 = MH/MR
Bit 1: 1 Bit 0: 0 = MH/MR/MMR
Bit 1: 1 Bit 0: 1 =
MH/MR/MMR/JBIG
Compression modes available in
transmit mode
Bit 3: 0 Bit 2: 0 = MH only
2-3 Bit 3: 0 Bit 2: 1 = MH/MR
Bit 3: 1 Bit 2: 0 = MH/MR/MMR
Bit 3: 1 Bit 2: 1 =
MH/MR/MMR/JBIG
4 Not used
(0, 0) (0, 1): Disable smoothing if the machine receives
halftone images from other manufacturers fax machines
frequently.
This function is available only when the Duplex unit is
equipped.
This SW is disabled on Report/List-Output.
0: Left side area stapled
1: Upper side area stapled
Do not change the settings.
COMMENTS
These bits determine the compression capabilities to be
declared in phase B (handshaking) of the T.30 protocol.
These bits determine the compression capabilities to be
used in the transmission and to be declared in phase B
(handshaking) of the T.30 protocol.
Do not change the settings.
Bit Switches
217