Printer Switches - Ricoh D127 Field Service Manual

5. Appendix: Fax Service Program

Printer Switches

Printer Switch 00 [SP No. 1-103-001]
No
Select page separation marks
0 0: Off
1: On
Repetition of data when the
received page is longer than the
printer paper
1
0: Off
1: On
Prints the date and time on
received fax messages
2
0: Disabled
1: Enabled
3-7 Not used
Printer Switch 01 - Not used (do not change the settings) [SP No. 1-103-002]
Printer Switch 02 [SP No. 1-103-003]
No
212
FUNCTION
FUNCTION
COMMENTS
0: If a 2 page RX transmission is split, [*] is printed in the
bottom right corner of the 1st page and only a [2] is
printed in the upper right corner of the 2nd page.
1: If a 2 page RX transmission is split into two pages, for
example, [*] [2] is printed in the bottom right corner of
the 1st page and only a [2] is printed in the upper right
corner of the 2nd page.
• This helps the user to identify pages that have been
split because the size of the paper is smaller than the
size of the document received. (When A5 is used to
print an A4 size document, for example.)
1: Default. 10 mm of the trailing edge of the previous
page are repeated at the top of the next page.
0: The next page continues from where the previous page
stopped without any repeated text.
This switch is only effective when user parameter 02 - bit
2 (printing the received date and time on received fax
messages) is enabled.
1: The machine prints the received and printed date and
time at the bottom of each received page.
Do not change the settings.
COMMENTS