Ricoh D127 Field Service Manual page 430

5. Appendix: Fax Service Program
The available memory threshold,
below which ringing detection
0-7
(and therefore reception into
memory) is disabled
Communication Switch 0E [SP No. 1-104-015]
No
Minimum interval between
0-7
automatic dialing attempts
Communication Switch 0F – Not used (do not change the settings.)
Communication Switch 10 [SP No. 1-104-017]
No
Memory transmission: Maximum
0-7 number of dialing attempts to the
same destination
Communication Switch 11 – Not used (do not change the settings.)
Communication Switch 12 [SP No. 1-104-019]
No
Memory transmission: Interval
0-7 between dialing attempts to the
same destination
222
FUNCTION
FUNCTION
FUNCTION
00 to FF (Hex), unit = 4 kbytes
(e.g., 06(H) = 24 kbytes)
One page is about 24 kbytes.
The machine refers to this setting before each fax
reception. If the amount of remaining memory is below
this threshold, the machine cannot receive any fax
messages.
If this setting is kept at 0, the machine will detect ringing
signals and go into receive mode even if there is no
memory available. This will result in communication
failure.
COMMENTS
06 to FF (Hex), unit = 2 s
(e.g., 06(H) = 12 s)
This value is the minimum time that the machine waits
before it dials the next destination.
COMMENTS
01 – FE (Hex) times
COMMENTS
01 – FF (Hex) minutes