Fax Option (D655) - Ricoh D127 Field Service Manual

1. Remove the I/F-slot cover [A] (
2. Install the Gigabit Ethernet board (Knob-screw x 2) into the I/F-slot [B].
3. Attach one ferrite core [A] to the end of the Ethernet interface cable, and then attach the other
ferrite core [B] about 10cm from the end of the Ethernet interface cable.
4. Connect the Ethernet interface cable to the Gigabit Ethernet port.
Make sure that the machine can recognize this option (see 'Check All Connections' at the end of this
section).

Fax Option (D655)

Fax Unit is option for D127 but standard for D128.
The bracket on which Fax Unit is mounted is embedded in the controller box.
x 2).
Controller Options
63