Ricoh D127 Field Service Manual page 445

IP Fax received telephone number
confirmation
7
0: No confirmation,
1: Confirmation
IP-Fax Switch 01
No. FUNCTION
Select IP FAX Delay Level
Bit3 Bit2 Bit1
0 0 0
0 0 0
0-3
0 0 1
0 0 1
4-7 IP Fax preamble wait time setting
IP Fax Switch 02 [SP No. 1-111-003]
No. FUNCTION
When "0" is selected, fax data is received without
checking the telephone number.
When "1" is selected, fax data is received only
when confirming that the telephone number from
the sender matches the registered telephone
number in this machine. If this confirmation fails, the
line is disconnected.
Raise the level by selecting a higher setting if too
many transmission errors are occurring on the
Bit0 Setting
network.
If TCP/UDP is enabled on the network, raise this
0 Level 0
setting on the T.30 machine. Increasing the delay
1 Level 1
time allows the recovery of more lost packets.
If only UDP is enabled, increase the number of
0 Level 2
redundant packets.
1 Level 3
Level 1 to 2: 3 Redundant packets
Level 3: 4 Redundant packets
Selects the preamble wait time.
[00 to 0F]
There are 16 values in this 4-bit binary switch
combination.
Waiting time: set value level x 100 ms
Max: 0F (1500 ms) Min: 00 (No wait time)
The default is "0000" (00H).
Bit Switches
COMMENTS
COMMENTS
237