Ricoh D127 Field Service Manual page 474

5. Appendix: Fax Service Program
Designates the bits to
reference for original size of
e-mail attachments
7
0: Registered (Bit 0 to 6)
1: No registration.
Switch 03 - Not used (do not change the settings)
Switch 04
No
Full mode address selection
0: Full mode address
0
1: No full mode (simple
mode)
1-7 Not used
Switch 05
No
Direct transmission selection
to SMTP server
0
0: ON
1: OFF
1-7 Not used
Switch 06 - Not used (do not change the settings)
Switch 07 - Not used (do not change the settings)
Switch 08 - Not used (do not change the settings)
Switch 09 - Not used (do not change the settings)
266
The "0" selection (default) references the settings for Bits 00,
01, 02, 04 above. The "1" selection ignores the selections
of Bits 00, 01, 02, 04.
FUNCTION
If the other ends have the addresses, which have the full
mode function flag ("0"), this machine determines them as
full mode standard machines.
• This machine attaches the "demand of reception
• This machine updates the reception capability to the
Do not change these settings.
FUNCTION
Allows or does not allow the direct transmission to SMTP
server.
Do not change these settings.
COMMENTS
confirmation" to a message when transmitting.
address book when receiving.
COMMENTS