Figure 5 - 14. Counter Setup Mode Menu - Honeywell SmartPAC 2 User Manual

SmartPAC 2 with WPC Integration
If you choose toggle, this switches the state of the output relay. In other words, if the state of
the relay is open, it would then be closed, and vice versa. You can use this option to activate
a parts diverter. If you select pulse, this actuates the channel for a time you set (in
milliseconds). You can connect this output to any device that needs to be turned on once
every fixed number of strokes (equal to the batch counter).
NOTICE
"Pulse" and "toggle" are only available when the optional ProCamPAC is installed. If you
attempt to use either of these features without programmable cam, SmartPAC 2 will display
a message telling that it is not available.
You can also specify whether the strokes or good parts counter will increment each batch.
Setting Counter Output Mode
1. Press F1 to select "Counter mode." To illustrate the various options in counter setup
mode, the previous display shows batch 2 set to "toggle," and batch 3 to "pulse." Factory
settings are configured to "top stop" and "stroke."
2. Using cursor keys, highlight the output mode for "batch 1."
3. As you press ENTER, notice that the selections change from "top stop," to "toggle" to
"pulse," and back again. Make your selection, and then cursor down to "batch 2."
BATCH 1
BATCH 2
BATCH 3
STROKE, GOOD PARTS, BATCH 1
BATCH 2
BATCH 3
USE THE CURSOR KEYS TO CHOOSE THE ITEM
YOU WISH TO CHANGE. PRESS THE ENTER KEY
TO CHANGE. PRESS RESET WHEN DONE.
4. Repeat step 2 for "batch 2" and "batch 3."
5. If you selected "pulse" for any of the batch counts, use your "right" cursor key to scroll
to the "pulse (msec) time" column for that counter. Press ENTER.
6. A screen overlay appears enabling you to enter a value for channel on-time. Use the
number keys to set the channel on-time in milliseconds, up to a maximum of 9,999 ms,
SmartPAC 2 Program Mode
COUNTER MODE SELECTIONS
OUTPUT PULSE (MSEC)
MODE TIME
PULSE
TOP STOP
PULSE
COUNTER INCREMENT ANGLES

Figure 5 - 14. Counter Setup Mode Menu

Chapter 5
ADV. MODES
INCREMENT
MODE
250
STROKE
0 GOOD PARTS
0 GOOD PARTS
270
270
270
1126800
F1
page 289