Part 2 - Install And Wire Wpc - Honeywell SmartPAC 2 User Manual

1126800
Part 2 – Install and Wire WPC
This part of chapter 2 describes how to mount and wire your Wintriss Clutch/Brake Control.
It contains the following headings:
Mounting the WPC Control Enclosure, next section
Install WPC without Enclosure, page 34
Wiring the WPC, page 35
Connecting AC Wiring to WPC, page 35
Installing and Wiring Dual Safety Valve and Sensors for Clutch and Counterbalance Air
Pressure, page 37
Mounting and Wiring the Operator Station and Light Curtain(s), page 47
Install the Resolver, page 41
Install the Overrun Limit Sensor Magnetic Switch, page 44
Connecting Other Wintriss Products to WPC, page 50
Page 32
SmartPAC 2 with WPC Integration
Chapter 2 Installing SmartPAC 2 and WPC