Figure 3 - 12. Reset Key - Honeywell SmartPAC 2 User Manual

1126800
RESET Key
SmartPAC 2
POWER
BRAKE
WARNING
The RESET key has two functions:
To Exit the Current Display
The RESET key is used to exit the current display and return to the previous one when you
are making settings or looking at different screens or menus.
Example:
In Program mode, you are looking at the list of tools. To leave this screen and not make any
changes to any tools, press RESET. SmartPAC 2 returns to the previous screen.
The instructions on the display always tell you when you can press the RESET key. The
message will say something like, "Press Reset when done," or "Press Reset to cancel."
To Reset SmartPAC 2
The RESET key is used to reset SmartPAC 2 when an error is generated or a counter preset is
reached. When you press RESET, you are returned to the display where you were before the
message appeared. You can run the press again.
Page 182
F1
CAMBIE
AL ESPANOL
F2
F3
F4
F5
F6
F7
F8
1 2 3
PROG RUN
ENTER
4 5 6
HELP
7 8 9
RESET
0 .
CLEAR

Figure 3 - 12. RESET Key

Chapter 3
SmartPAC 2 with WPC Integration
RESET
key
RESET
SmartPAC 2 Keyboard, Displays
and Operating Modes