Entering The Main Menu - Honeywell W8735D Owner's Manual

Entering the Main Menu

IMPORTANT
Your installer may have configured your
Telephone Access Module. Before changing any
settings, discuss the changes with your installer.
To enter the Main menu:
1. Call your Telephone Access Module.
2. Enter your pass code.
• If your pass code is not yet programmed, you
hear "The pass code is not programmed."
(See "Pass Code Menu" on page 14 to
change the pass code.)
3. Listen to any active alerts.
4. Listen to the date and time, announcements,
and (if available) the outdoor temperature, and
indoor humidity. announcements.
5. You hear "Main menu" followed by the main
menu selections. To make a selection, you enter
the menu number.
Enter:
Thermostat Menu
1
Time and Date Menu
2
Passcode Menu
3
Alert Menu
4
Call and Ring Menu
5
Limit Menu
6
Zone Menu
7
9 Repeat User Menu
# Exit (Disconnect)
Fig. 4. Main Menu Selections.
11
Single Thermostat Settings
Global Thermostat Settings
hh, mm & mm, dd, yyyy
Change the System Passcode
Set alert priority and dial out time
Retrieve alert history
Configure the dial-out phone numbers
Configure the number of rings
Configure temperature & humidity limits
Set factory default limits
Assign zone names
Set zone announcement options
M28143
69-2028—01