Clear Key - Honeywell SmartPAC 2 User Manual

SmartPAC 2 with WPC Integration
• To key in numbers: Use the number keys to place the number in the box; then press
ENTER.. SmartPAC 2 will accept the number and close the entry box.
• To key in letters: Use the cursor keys to highlight the desired letter, space or symbol;
then press ENTER to accept that letter. In the Alphanumeric mode box, Figure 3 - 7, you
can press the F2 key to change between upper- and lower-case letters. To accept an
alphabetic or alpha-numeric entry, press function key F6. For more information about
the alphanumeric mode, see Chapter 4.
• To cancel your selection, in either case, press RESET.

Clear Key

The CLEAR key is in the lower left hand corner of the number keys. Use the CLEAR key to
delete characters when you are entering a number or name. You also use the CLEAR key as
directed in other procedures, such as deleting a tool.
SmartPAC 2 Keyboard, Displays
and Operating Modes
SmartPAC 2
POWER
BRAKE
WARNING
1 2 3
ENTER
4 5 6
HELP
7 8 9
RESET
0 .
CLEAR
Chapter 3
F1
CAMBIE
AL ESPANOL
F2
F3
F4
CLEAR key
F5
F6
F7
CLEAR
F8
PROG RUN
1126800
Page 177