Table of Contents
Advertisement
SmartPAC 2 with WPC Integration
Problem:
This error indicates that while two light curtains are wired to WPC, only
one light curtain has been selected on the WPC.
Remedy:
Check that WPC is properly configured for a second light curtain. Clear
the first light curtain. Refer to the section "Setting Press Options" in
Chapter 4 to properly configure the dual setting.
Problem:
This error indicates that the first light curtain (A) is blocked at the start of
or during the stroke.
Remedy:
Check to see that light curtain A is clear.
Problem:
This error indicates that the second light curtain (B) is blocked at the start
of or during the stroke. It could also indicate that you have dual light
curtain selected at the program select switches in WPC, but only one set of
light curtains is wired.
Remedy:
Check to see that light curtain B is clear. If necessary, check that you
have properly wired both sets of light curtains and that the program select
switches are set properly (refer to the section in Chapter 4, "Setting Press
Options").
SmartPAC 2 Fault Messages
62
63
64
Chapter 7
1126800
page 403
- Quick Links:
- Smartpac 2
Hide quick links:
Advertisement
Table of Contents
