Figure 5 - 4. Tool Manager - Honeywell SmartPAC 2 User Manual

SmartPAC 2 with WPC Integration
NOTICE
To e-mail a copy of this screen, see "Screen Capture," page 199.
NOTICE
Tool Manager lists the tools differently, depending on how you have set Tool Number mode
in Initialization (page 206).
Numeric mode: Tools listed by tool number
Alpha-numeric mode: Tools listed by tool name
The example above is "numeric," listed by tool number.
Refer to the pages indicated for instructions for performing the following procedures:
• Load an Existing Tool, page 278
• Delete a Tool, page 279
• Tool Template, page 280
• Create a New Tool, page 281
• Copy an Existing Tool, page 282
• Change Settings for an Existing Tool, page 282
For HELP press the HELP key located at the center of the cursor (arrow) keys.
SmartPAC 2 Program Mode

Figure 5 - 4. Tool Manager

Chapter 5
1126800
F1
F2
F3
F4
F5
F6
F7
F8
page 277