Honeywell SmartPAC 2 User Manual page 491

SmartPAC 2 with WPC Integration User Manual
USB disk
voltage selector switch
yellow sensors
Glossary
a storage device that connects to a computer or to SmartPAC 2
through a USB connector (J117 on the SmartPAC 2 PC board).
It is not actually a disk drive, but computers treat it as if it were.
enables the setting of the power supply from 115V to 230V;
located on the power supply board
normally open to ground; a stop command is sent to the press as
soon as the sensor actuates — closes to ground
1126800
page 469