View Global Cams - Honeywell SmartPAC 2 User Manual

1126800

View Global Cams

NOTICE
Global cams may be set for any cam channel except 6, 7 and 8. See Chapter 4,
Initialization, for details.
NOTICE
To delete a global cam, select it from the Global Cam list under Initialization. In the Global
Cam Type screen, select "Delete Channel Settings." See "SET GLOBAL CAMS," page 216.
NOTICE
If you set or changed global cams while a tool was loaded, you must reload the tool to make
the global cams take effect.
Events that remain the same on all tools can be programmed once as "global cams" in
Initialization mode and will apply to all the tools entered into this SmartPAC 2. This saves
programming the same cam information for each tool and ensures that the cam always
operates the same.
Cams programmed as global cams are not available for programming for individual tools.
To see the global cams, in the Cam Program menu, Figure 5 - 27, press F5-"View Global
Cam Summary." A screen appears similar to the next figure, showing the global cams, if
any, showing for each the channel number, cam name, type of timing and the timing settings.
page 304
Figure 5 - 28. Global Cam Summery
Chapter 5
SmartPAC 2 with WPC Integration
SmartPAC 2 Program Mode