Specifications: Smartpac 2 With Wpc - Honeywell SmartPAC 2 User Manual

1126800

Specifications: SmartPAC 2 with WPC

SmartPAC 2 with SmartPAC 2 Enclosure
12.76" x 11.53" x 5.28" (324 x 293 x 134 mm), NEMA 12, shock mounted
WPC Equipment
SmartPAC 2 Panel mount
12.3" x 11.3" (312 x 287 mm)
WPC Enclosure
16" x 16" x 9" (40.64 x 40.64 x 22.86 cm), NEMA 12, shock mounted
WPC Without Enclosure
allow 15.5" x 15.5" x 5.5" (394 x 394 x 140 mm) for installation.
Equipment Resolver
0.75" (1.9 cm) keyed shaft, rated shaft loading: 200 lb axial, 200 lb radial
Available from
Wintriss
Operator Station
Controls
NEMA 12; includes two palm buttons, top-stop and emergency stop buttons, and prior
act button; and palm time and mute LED indicators; pre-wired
Dual Safety Valve
(DSV): 0.75" (1.9 cm); controls air flow to the clutch. Call the factory for other sizes.
Air Pressure Switch
12-150 PSI; monitors clutch air supply pressure (150 PSI, maximum)
Electrical SmartPAC 2 Input
115/230 ± 10% VAC 50/60 Hz, 50 VA
Input check circuit
12-250 VAC or VDC
WPC Input
115/230 ± 10% VAC (selectable); 50/60 Hz, 100 VA
Oper. Temp. 32° to 122° F (0 ° to 50 ° C)
Speed
7-800 SPM; 14-1600 SPM optional at reduced accuracy
Accuracy
± 2/3° (± 1.33° for high speed version)
Counters Good parts, strokes, 3 batch with presets (7 digits)
Number-of-hits-on-tool counter: counts all hits on tool; resettable to 0 after
maintenance
Display
10.4" (264 mm) color active matrix TFT liquid crystal display (LCD)
Brake warning LED, Power LED
Memory Allows storage of settings for 200 tools
SmartPAC 2 Inputs for resolver, position sensor (resolver slippage detection),
input check circuit, remote reset input, setup mode input
Inputs/Outputs
USB, PS/2 and Ethernet RJ-45 connectors
Outputs for Top stop, emergency stop: ratings 0-4 A resistive, max (AC or DC);
Normally open—Held closed. Fault condition or power off opens relay(s)
WPC Inputs Resolver
Overrun limit switch
Two Operator Stations
DSV monitor
Air Pressure Switch
Page 20
SmartPAC 2 with WPC Integration
Chapter 1 Introduction to SmartPAC 2