Honeywell SmartPAC 2 User Manual page 46

1126800
DANGER
!
ELECTRIC SHOCK OR HAZARDOUS ENERGY
• Disconnect main power before installation.
• Remove all power to the press, press control, and other equipment used with the press.
• Remove all fuses and "tag out" per OSHA 1910.147 Control of Hazardous Energy (Lockout/
Tagout).
• Ensure that Installation is performed by qualified personnel.
• Complete all wiring installation procedures before connecting to the AC power source.
Failure to comply with these instructions will result in death or serious injury.
DANGER
!
PROGRAMMABLE CAM SWITCH NOT FOR SAFETY USE
Use SmartPAC 2's programmable cam switch only to control auxiliary functions. The
SmartPAC 2 programmable cam capability should never be used to provide timing signals
for any safety use, including clutch/brake control or muting of light curtains.
Failure to comply with these instructions will result in death or serious injury.
NOTICE
OPTIONAL MODULES PROCAMPAC AND DIPROPAC INCLUDED IN MANUAL
Your SmartPAC/WPC System comes standard with press control capabilities. You may also
include one or both of the following options: DiProPAC die protection or ProCamPAC
programmable cam switch. This manual includes instructions for installing and using these
options. Remember that they are options and might not be included in your system.
If you ordered SmartPAC with other optional modules, such as AutoSetPAC load monitor or
ProPAC process monitor, refer to the option module's user manual for complete details on
its installation and use.
NOTICE
UPGRADING FROM ORIGINAL SMARTPAC
See "Appendix E – Upgrade from Original SmartPAC," page 457 for instructions on
upgrading from original SmartPAC to SmartPAC 2.
This chapter describes how to install WPC, SmartPAC 2 and some SmartPAC options.
After you have completed your installation, be sure to follow the procedures under "Part 7 –
Perform Checkout Tests," page 127, to ensure that WPC is working properly before
proceeding to the next chapters.
Page 24
SmartPAC 2 with WPC Integration
Chapter 2 Installing SmartPAC 2 and WPC