Figure 4 - 36. Set Passwords Menu - Honeywell SmartPAC 2 User Manual

1126800
NOTICE
DEFAULT PASSWORDS
Your SmartPAC 2 comes from the factory with all three passwords set to the default
password, "1234." If you have upgraded your SmartPAC 2 in the field, it may have different
passwords.
A password is a one-to-four-digit number. Follow the steps below to change password(s).
1. In the Initialization menu, select Security access.
2. The display appears similar to Figure 4 - 35. Press F1.
3. The display shows the Set Passwords menu, Figure 4 - 36.
4. Highlight the password you want to change. Press ENTER. The display looks like the
next figure.
Figure 4 - 37. "Enter a New Password" Screen
5. Key in the new password. Press ENTER. The display returns to the Set Passwords
menu.
Page 256

Figure 4 - 36. Set Passwords Menu

ENTER A NEW PASSWORD
UP TO 4 DIGITS LONG
1,234
USE THE KEYPAD TO ENTER NUMBERS.
USE THE UP/DOWN CURSON KEYS TO
INCREASE/DECREASE. PRESS ENTER
WHEN DONE. PRESS RESET TO CANCEL.
Chapter 4
SmartPAC 2 with WPC Integration
SmartPAC 2 Initialization Mode