Figure 4 - 21. Completed Tool Number Information Screen - Honeywell SmartPAC 2 User Manual

1126800
TOOL
INFO.
NAMES
ENTER TO CHANGE. PRESS RESET WHEN DONE.

Figure 4 - 21. Completed Tool Number Information screen

NOTICE
Do not change the number of decimal places after you have entered values for any specific
tools. If you change the number of decimal places, any value you entered will be changed
by a factor of ten for each decimal place added or removed.
5. When you have finished setting up the tool number information, press RESET to return
to the main Initialization menu.
Number of decimal places
Example
0
whole numbers: press speed (SPM )
1
2
die location (mm)
3
pass line height (inches)
4
precise values: material thickness
8
Yes or No designation
Page 224
NAME
1 PASS LINE HT PASS LINE HT
2 STRAIGHTENER
3 HYD. OVLD.
4 PRESS SPEED
5 CONVEYOR
6 PART LUBE
USE CURSOR KEYS TO SELECT A NAME. PRESS
Table 4 - 3. Decimal places and formats
Chapter 4
SmartPAC 2 with WPC Integration
UNITS PLACES
IN
IN
TONS
SPM
digits to digits to
left of right of
decimal decimal
point point
up to none (0)
seven (7)
up to one (1)
five (5)
up to two (2)
four (4)
up to three (3)
three (3)
up to four (4)
two (2)
not applicable
SmartPAC 2 Initialization Mode
2
2
0
0
8
8
Range
0 to
9,999,999.
0.0
99,999.9
0.00
9,999.99
0.000
999.999
0.0000
99.9999
NO (0)
YES (1)