Outline Of Table Operation; 10.1.1 Applicable Positioning Operations For Table Operation; 10.1.2 Types Of Table Information And Number Of Registered Tables - Mitsubishi FX3U-20SSC-H User Manual

FX -20SSC-H Positioning Block User's Manual
3U
10. Table Operation
10.1

Outline of Table Operation

This section describes the table information setting and table operation motions.
For details on the positioning commands available with the table operation, refer to the following.
About the table operation
The "table operation" executes preset positioning operation patterns from the table information. Positioning
operations are consecutively executed and may be arranged in any order. A few positioning operations are
only available in table operation.
Positioning operations for table operation only
• Multi-speed operation
• Circular interpolation
• Continuous pass operation

10.1.1 Applicable positioning operations for table operation

• Applicable positioning operations for table
operation
- 1-speed positioning operation
- Interrupt 1-speed constant quantity feed
- 2-speed positioning operation
- Interrupt 2-speed constant quantity feed
- Interrupt stop
- Multi-speed operation
- Linear interpolation
- Linear interpolation (interrupt stop)
- Circular interpolation
- Mechanical zero return
*1. When interpolation operations are consecutively repeated in a table operation, the 20SSC-H provides
continuous pass operation.

10.1.2 Types of table information and number of registered tables

Type of table information
X-axis table information
Y-axis table information
XY-axis table information
190
→ For details on each positioning operation, refer to Chapter 9
*1
*1
*1
→ For details on continuous operation, refer to Section 10.10
Number of registered tables
300 tables
300 tables
300 tables
10.1 Outline of Table Operation
• Inapplicable positioning operations for table
operation
- Variable speed operation
- Manual pulse generator
- JOG operation
- Reciprocal movement instruction
(Ver.1.10 or later)
Table number
0 to 299
0 to 299
0 to 299
10 Table Operation