FX
-20SSC-H Positioning Block User's Manual
3U
11.3.33 Servo status 2 [BFM #72, BFM #172]
BFM Number
X-axis
BFM #72
BFM #172
11.3.34 Flash memory write count [BFM #91, #90]
The number of times data is written to the flash memory is stored.
BFM Number
X-axis
BFM #91,#90
Note
The maximum number of writes to the built-in flash memory is 100,000 times.
236
Bit
Number
Y-axis
A parameter update completed flag
•
This bit is set when an automatic update of servo
b0
parameters is completed.
•
Cleared when a servo parameter save command or
servo parameter initialization command is finished.
Parameter updating flag
b1
•
This bit is ON while servo parameters are being updated.
Parameter update request flag
b2
•
This bit turns ON when the servo amplifier sends servo
parameter update request.
b3 to b15
Not available
Y-axis
-
The number of writes to the flash memory
11 Buffer Memory (Parameters & Monitored Data)
Description
Description
11.3 Monitor Data
Value Format
Default
Bit
-
Value Format
Default
Decimal
-