Mitsubishi FX3U-20SSC-H User Manual page 151

FX -20SSC-H Positioning Block User's Manual
3U
1. Changing the jog speed using the operation speed change function
The system does not accept a change of the operation speed when the change command in operation
disabled is ON.
JOG speed (parameter)
Operation speed
Speed change command
in positioning operation
Speed change value
During operation
speed change
Forward rotation JOG
Reverse rotation JOG
Change command in operation
disabled
Speed change command
positioning operation
Speed change value
Operation speed present value
Received target speed (Ver.1.20 or later)
During operation speed change
JOG speed
2. Changing the override setting
Use the override setting to change the ratio of the actual operation speed to the JOG speed.
→ For speed change during operation using the override function, refer to Subsection 7.6.1
Override setting
Forward rotation JOG
Reverse rotation JOG
Override setting
Operation speed present value
JOG speed
→ For speed change during operation using the operation speed change function,
Speed
10000Hz
JOG input
OFF ON
10000Hz
0Hz 10000Hz
Operation command 1
Operation command 1
Operation command 1
in
Operation command 1
Status information
Speed
10000Hz
ON
JOG input
OFF
JOG speed
10000Hz
100%
Operation command 1
Operation command 1
7000Hz
7000Hz 0Hz
OFF ON
7000Hz
OFF ON
BFM Number
X-axis
BFM #518 b4 BFM #618 b4
BFM #518 b5 BFM #618 b5
BFM #518 b12 BFM #618 b12
BFM #518 b13 BFM #618 b13
BFM #513,#512 BFM #613,#612
BFM #11,#10 BFM #111,#110
BFM #27,#26 BFM #127,#126
BFM #28 b13 BFM #128 b13
BFM #14013,#14012 BFM #14213,#14212
7000Hz
70%
BFM Number
X-axis
BFM #518 b4 BFM #618 b4
BFM #518 b5 BFM #618 b5
BFM #508 BFM #608
BFM #11,#10 BFM #111,#110
BFM #14013,#14012 BFM #14213,#14212
8 Manual Control
8.2 JOG Operation
refer to Subsection 7.6.2
Time
Data type
Y-axis
Control data
Control data
Control data
Control data
Control data
Monitor data
Monitor data
Monitor data
Positioning parameters
Time
Data type
Y-axis
Control data
Control data
Control data
Monitor data
Positioning parameters
1
2
3
4
5
6
7
8
9
10
145