8
N806177
9
N806177
10
N806177
11
N806300
12
W706560
13
N806300
14
N806300
15
N806300
55. Tighten the four oil pan bolts in the sequence shown in three stages.
Stage 1: Tighten to 2 Nm (18 lb-in).
Stage 2: Tighten to 20 Nm (15 lb-ft).
Stage 3: Tighten an additional 60 degrees.
56. Install the belt idler pulleys.
57. Lubricate the engine front cover and the front oil seal inner lip with clean engine oil.
Bolt, Hex Flange Head Pilot, M8 x 1.25 x 53
Bolt, Hex Flange Head Pilot, M8 x 1.25 x 53
Bolt, Hex Flange Head Pilot, M8 x 1.25 x 53
Stud, Hex Shldr Pilot, M8 x 1.25 x 65 — M8 x 1.25
x 26
Stud and Washer, Hex-Head Pilot, M8 x 1.25 x 65
— M8 x 1.25 x 16
Stud, Hex Shldr Pilot, M8 x 1.25 x 65 — M8 x 1.25
x 26
Stud, Hex Shldr Pilot, M8 x 1.25 x 65 — M8 x 1.25
x 26
Stud, Hex Shldr Pilot, M8 x 1.25 x 65 — M8 x 1.25
x 26