Ford 2003 Mustang Workshop Manual page 1309

Hide thumbs Also See for 2003 Mustang:

Table of Contents

NOTE: Before assembling the cylinder block, all sealing surfaces must be free from chips, dirt, paint

and foreign material. Also, make sure the coolant and oil passages are clear.

5. Install the crankshaft upper main bearings into the cylinder block and lubricate them with clean

6. NOTE: Do not install the upper thrust washer until the crankshaft is installed. Refer to Step 3.

NOTE: Do not install the upper thrust washer until the crankshaft (6303) is installed. Refer to

Install the crankshaft onto the upper main bearings.

Show Quick Links

Table of Contents