Ford 2003 Mustang Workshop Manual page 1328

Hide thumbs Also See for 2003 Mustang:

Table of Contents

62. NOTE: Use special tool 303-009 or a suitable strap wrench to hold the crankshaft pulley.

Install the washer and the bolt. Tighten the bolt in four stages.

Stage 1: Tighten to 90 Nm (66 lb-ft).

Stage 2: Loosen one full turn.

Stage 3: Tighten to 50 Nm (37 lb-ft).

Stage 4: Tighten an additional 90 degrees.

63. Install the LH engine mount.

64. Install the RH engine mount.

Show Quick Links

Table of Contents