Features - MIMAKI JV33-130BS Operation Manual

Features

The features of the machine are described below.
Understanding them together with the operating instructions given in this manual will help you use the
machine properly.
High image quality and High-speed printing realized by the
new generation printer head.
Newly developed printer head, 1 head consisting of 1440 nozzles (180 nozzles x 8 lines), is adopted.
High image quality and High-speed printing is enabled by adopting the variable dots technology.
Double cartridge automatic change function
Long-run printing is enabled by the ink capacity of 880 cc /1 color by adopting the ink cartridge (2 car-
tridges /1 set) automatic change function.
Indication of the ink Remains
Since the amount of ink that remains can be checked even during operation of the machine, you can
use the ink and media without waste.
Intelligent heater equipped
Heaters are arranged at 3 locations of the Pre-heater, Print heater and Post-heater and the tempera-
ture of each heater is independently adjustable.
Heating temperature is also adjustable to the temperature suitable for the media used since the intelli-
gent function consisting of Standby mode and Auto shut-off is provided so that the temperature is con-
trolled detecting the environmental temperature.
Easy maintenance
The automatic capping system for the heads eliminates the need of head cleaning before turning off
the power. Ink discharge passage is automatically cleaned from the cap.
Nozzles can be unclogged by performing the cleaning function.
If the machine is not in use for a prolonged period of time, it automatically performs nozzle clogging
preventive operation at fixed intervals. However, the main power must be left turned on.
The machine counts the time when not in use. When the power is turned on or when printing is started,
the machine automatically performs head cleaning to prevent nozzle clogging.
Convenient direct keys
Use of the direct keys permits quick access to the respective various built-in functions.
Set of the drawing origin by LED pointer
For easy setting of the drawing origin changed, positioning can be done by a light point of the LED
pointer equipped on the carriage.
ix