Table of Contents
Advertisement
Features
The features of the device are described below. Together with the method of operation of the
device explained in this manual, they help you understand how to use the device properly.
Ultraviolet ray curing ink used
Use of ultraviolet ray curing ink (UV ink), which has been recently developed, enables direct
printing onto media.
High-speed interface used
Use of high-speed interface IEEE1394 allows high-speed data reception from computers.
Curing and fixing of ink enabled after printing
Use of an ultraviolet curing device (UV lamp) enables curing and fixing of ink after printing.
Wide printable area
The allowable print area is 600 mm (scan) x 500 mm (feed).
Applicable to media with maximum thickness of 50 mm
This unit is applicable to media with maximum thickness of 50 mm.
Vacuum table equipped
This unit is equipped with a suction-type blower table for fixing media.
- viii -
Advertisement
Table of Contents
