Features - MIMAKI UJV-160 Operation Manual

Features

Characteristics of this machine are introduced here. We hope this information helps your understanding on
drawing with this machine together with operation method explained in this book.
Ultraviolet ray curing ink
Direct printing on media is allowed by using newly developed ultraviolet curing ink.
Printable types of media has increased.
Curing and fixing of ink after printing
As the UV LED unit is mounted, ink is cured or fixed after printing.
The pre-heater and the print heater are also equipped. The temperature of each heater is independently
adjusted. The temperature is controlled detecting the environmental temperature. You can set the
temperature suitable for the media used.
By heating media and controlling small dots, the quality of printed image becomes higher.
Printing on media of up to 10mm thickness
Available for print on the media of up to 10mm thickness by Y bar up/down mechanism.
High-speed interface
High-speed data receiving from a computer is allowed by using the high speed interface [USB2.0].
Printing on wide media
Available for print on wide media of 1600mm (63 inch).
Constant amount of media feeding function
Feeds the media at the set constant amount with the equipped media encoder and prints a stable, high
quality images.
viii