Tilt Up And Down - TOHATSU M 2.5A 2 Owner's Manual

34
ENGINE OPERATION
ENOM00054-0
Improper trim angle (bow dips into the
water)
Set the thrust rod higher if the bow of
the boat is below horizontal.
Manual Tilt type
7
1. Thrust rod
2. Higher
3. Lower
Trim angle adjustment (Manual tilt type)
The transom angle adjustment
1. Stop the engine.
2. Shift into neutral position (3.5B2 only)
3. Tilt up the outboard motor.
4. Remove the thrust rod by pressing
clip as shown picture.
ENOF00053-0
1
2
3
ENOF00229-0
1. Push in
2. Pull out
5. Reinstall the thrust rod in the desired
position securely.
6. Gentry tilt down the outboard motor.
ENOM00060-A

8. Tilt up and down

ENOW00055-1
WARNING
Do not tilt the outboard motor up or down
when swimmer(s) and/or passenger(s) are
near to prevent them from being caught
between outboard motor body and clamp
bracket.
ENOW00048-1
WARNING
When tilting up or down, be careful not to
place your hand between the swivel bracket
and the stern bracket.
ENOW00057-1
CAUTION
Do not tilt up the outboard motor while
engine is operating, or no cooling water may
be discharged, leading to engine seizure due
to overheating.
2
1
ENOF01612-0