TRENDnet TPE-4840WS User Manual page 98

48-port gigabit web sart poe+ switch
Hide thumbs Also See for TPE-4840WS:
Table of Contents

Advertisement

TRENDnet User's Guide
Verify MAC
Select one of the following choices from the pull-
Address:
down menu:
Enabled: The MAC address of each ingress
ARP packet is validated when compared
against the Binding Table entries. Invalid
ARP packets are discarded.
Disabled: The MAC address of each ingress
ARP packet is not validated against the
Binding Table. All ARP packets are
forwarded through the switch without
regard to the IP and MAC Address
information in the packet header.
Backup
select one of the following choices from the pull-
Database:
down menu:
Enabled: The Web Management saves a
backup copy of the Binding Table to flash at
a specified interval (Database Update
Interval) of time.
Disabled: The Web Management does not
save a backup copy of the Binding Table to
flash.
Database
Enter the database update interval. The range of this
Update
interval is 600 to 86400 seconds.
Interval:
DHCP Option
select one of the following choices from the pull-
82 Insertion:
down menu:
Enabled: The Web Management inserts the
DHCP Option 82 information into the DHCP
packets.
Disabled: The Web Management does not
insert the DHCP Option 82 information into
the DHCP packets.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
© Copyright 2015 TRENDnet. All Rights Reserved.
DHCP Snooping over VLAN
DHCP Snooping > VLAN Settings
In this section, you can define an existing VLAN to apply DHCP snooping.
In the field, enter the existing VLAN ID to apply DHCP Snooping. Then click
Add to add the VLAN entry to the table.
On the list, you can click Modify to modify an entry or click Delete or
delete the entry. You can also click Delete All to delete all of the entries in
the table. If the entries span multiple pages, you can navigate page
number in the Page field and click Go or you can click First, Previous,
Next, and Last Page to navigate the pages.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
97

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tpe-484ows

Table of Contents