Table of Contents
Advertisement
TRENDnet User's Guide
Change administrator password and add accounts
System > Administration
This section explains how to change the administrator password create
additional administrative user accounts for access to the switch
management page.
To create additional administrative user accounts
Administration Settings
User Name: Enter the user name of the new account.
Password: Enter the password for the new account
Confirm
Enter the password again for verification.
Password:
Note: The password consists of up to 12 alphanumeric characters.
Click Add to add the new administrator.
© Copyright 2015 TRENDnet. All Rights Reserved.
Changing the administrator password
In the Password field, enter the new password and enter the new
password again the Confirm Password field to verify. Then, click Apply.
Note: The password consists of up to 12 alphanumeric characters.
The index 1 admin user on the administration table is the default
administrator. You can modify the password, but you cannot remove
it.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
17
Advertisement
Table of Contents
