Table of Contents
Advertisement
TRENDnet User's Guide
Configure the SNMP Group Access Table
SNMP > Group Access Table
The SNMP View Names are defined in the SNMP Group Access Table
and are based on the User and Group Names.
© Copyright 2015 TRENDnet. All Rights Reserved.
To create SNMP View Names:
Before you can create an SNMP View name, you must define a Group
Name using the SNMP User/Group page.
Enter the Group Name. This entry must be pre-defined on the
SNMP User/Group page.
Enter the Read View Name. This name is an optional field. It can
be up to 31 characters in length.
Enter the Write View Name. This name is an optional field. It can
be up to 31 characters in length.
Enter the Notify View Name. This name is an optional field. It can
be up to 31 characters in length.
From the Security Model pull-down menu, select v3.
Enter the Security Level from the pull-down menu. The selection
options are:
o NoAuthNoPriv: This selection is the appropriate
selection when no Auth-Protocol or Priv-Protocol (no
encryption) are selected on the SNMP User/Group page.
o AuthNoPriv: Choose this selection when encryption has
been enabled but only the Auth-Protocol has a password
assigned and the Priv-Protocol has been selected as none
on the SNMP User/Group page.
o AuthPriv: When the Auth-Protocol or Priv-Protocol have
been enabled, choose this selection.
Click the Add button.
TPE-4840WS
64
Advertisement
Table of Contents
