TRENDnet TPE-101I Specifications

Power over ethernet (poe) injector v2.0r

Hide thumbs Also See for TPE-101I:

Download this manual See also: User Manual

FEATURES

• Compliant with IEEE 802.3af Power over Ethernet (PoE) Standard

• Reduce Cabling for Wireless APs, IP Phone and any IEEE 802.3af Powered Device (PD)

• Supplies Power to PD up to 15.5 Watts

• Automatically Detecting PoE Terminals and Supplying Inline Power

• Advanced Auto-Sensing Algorithm Giving Power only to 802.3af end device

• High Safety Standards with Short Circuit Protection

• Supports Power Detection and Classification

• 5-Year Warranty

TEW-503PI (07-28-2005)

Power over Ethernet (PoE) Injector

TPE-101I

(V2.0R)

TPE-101I Power over Ethernet Injector provides an innovative and

cost effective solution to a variety of Ethernet devices such as VoIP

phones or Wireless Access Points. Reduce costs by using existing

CAT5 cable to deliver both power and data where power source is

difficult to obtain.

TPE-101I

(V2.0R)

rev:12.07.2007

Need help?

Do you have a question about the TPE-101I and is the answer not in the manual?

Page 1 Power over Ethernet (PoE) Injector TPE-101I (V2.0R) TPE-101I Power over Ethernet Injector provides an innovative and cost effective solution to a variety of Ethernet devices such as VoIP phones or Wireless Access Points. Reduce costs by using existing CAT5 cable to deliver both power and data where power source is difficult to obtain.
Page 2: Specifications
1-888-326-6061 TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most recent product information please visit http://www.trendnet.com.