Table of Contents
Advertisement
TRENDnet User's Guide
Enable HTTPS/SSL (Secure Socket Layer) management access
System > SSL Settings
By default, your switch management page can be accessed using standard
web HTTP protocol which transmit files with clear text over the network.
Enabling HTTPS/SSL management access allows access to the switch
management page using encrypted communication prevents your data
been eavesdropped by unauthorized user.
Note: Once HTTPS/SSL management access is enabled, HTTP management access
will be disabled forcing all access to the switch management page using secure
encryption communication only.
SSL Settings
SSL Status: Enable or disable HTTPS/SSL management access
and disable/enable HTTP clear text mode at the
same time. Default: Disabled.
Note: When SSL is enabled, you need to access the switch management page using
HTTPS instead of HTTP. (e.g. https://192.168.10.200)
© Copyright 2015 TRENDnet. All Rights Reserved.
Click Apply to apply the change to the switch
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
21
Advertisement
Table of Contents
