Table of Contents
Advertisement
TRENDnet User's Guide
Configure the IPv6 Traffic Class Priority Settings
Bridge > QoS > IPv6 Traffic Class Priority Settings
IPv6 Traffic Class Global Settings: Select Enabled or Disabled. Click
Apply to save the settings.
IPv6 Traffic Class Settings
IPv6 Traffic
Specify the value of IPv6 class. Range: 0 – 255.
Class:
Class ID: Defines the priority assigned to the port. The
priorities are Highest, High, Medium and Low.
Click Add to add the traffic class setting entry to the table.
© Copyright 2015 TRENDnet. All Rights Reserved.
On the IPv6Traffic Class Table, you can click Modify to modify an entry
or click Delete or delete the entry. You can also click Delete All to delete
all of the entries in the table. If the entries span multiple pages, you can
navigate page number in the Page field and click Go or you can click First,
Previous, Next, and Last Page to navigate the pages.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
61
Advertisement
Table of Contents
