Advertisement
Quick Links
Advertisement
Related Manuals for TRENDnet TV-NVR104
Summary of Contents for TRENDnet TV-NVR104
- Page 1 Quick Installation Guide TV-NVR104 / TV-IP104D2 (V1.1)
-
Page 2: Table Of Contents
Table of Content 1 English 1. Before you start 2. Hardware Drive Installation (For TV-NVR104 only) 3. System Installation 4. Initial Setup 5. Setup Wizard... -
Page 3: Before You Start
Ÿ TV-NVR104 or TV-NVR104D2 Ÿ CD-ROM (Utility & User's Guide) Ÿ Power Adapter Ÿ Network cables (1.8 m / 6 ft.) Ÿ Optical Mouse Ÿ Quick Installation Guide Minimum System Requirements Ÿ Monitor/TV with VGA or HDMI connection Ÿ Hard drive (for TV-NVR104) -
Page 4: Hardware Drive Installation (For Tv-Nvr104 Only)
Skip this step if you have TV-NVR104D2. Note: Ÿ Static electricity can damage the TV-NVR104. Before handling the unit, discharge any static electricity by touching a metal object, or use an anti-static wrist strap. Ÿ The TV-NVR104 supports 3.5” SATA hard drive up to 6TB. - Page 5 4. Mount the hard drive to the TV-NVR104's drive bay using the mounting screws included with your hard drive. 5. Reattach the top cover to the unit. Make sure the lower panel lines up with the slots on the cover.
-
Page 6: System Installation
3. System Installation Power HDMI Display... -
Page 7: Initial Setup
4. Initial Setup 1. When you turn on your NVR you will be promoted to active the NVR. Please change the password to the requirements listed on the window and click “ ”. Activation Username admin New Password Confirm Passw... Enter new password. -
Page 8: Setup Wizard
5. Setup Wizard 1. First window will be if you want to start the wizard when the device starts. Please select the check box to your preference and click “Next”. Wizard Start wizard when device starts? Next Exit 2. Configure your time zone along with system date, time, and format then and click “Next”. **Our password recovery system utilizes the device time and date so it is important to set it up correctly** Wizard Time Zone... - Page 9 4. Next window is your ports and DNS settings. If you don't have or don't know what DNS settings are, you can click “Next” otherwise please configure your DNS settings then hit “Next”. Wizard Server Port 8000 HTTP Port RTSP Port Enable UPnP Enable DDNS DDNS Type...
- Page 10 TV-NVR104 / TV-NVR104D2 Trade Name: TRENDnet TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility. Safety EN 60950-1: 2006 + A11: 2009: +A1: 2010 + A12: 2011 + A2: 2013...
- Page 11 Technical Support If you have any questions regarding the product Please take a moment to register your installation, please contact our Technical Support. product online. Go to TRENDnet’s website at: Toll free US/Canada: 1-866-845-3673 www.trendnet.com/register Regional phone numbers available at www.trendnet.com/support...