Table of Contents
Advertisement
TRENDnet User's Guide
Configure IGMP Snooping Router Ports
Bridge > IGMP Snooping > IGMP Snooping Router Port
In the VLAN ID router port list, you can configure your Static and Dynamic
Router ports. IGMP Snooping Router Port configured manually is a Static
Router Port, and a Dynamic Router Port is dynamically configured by
the Switch when a query control message is received. To modify an entry,
click Modify to add statically add router ports.
© Copyright 2015 TRENDnet. All Rights Reserved.
Check the static router ports to add and click Apply to save the settings.
Note: You can click on All to add all ports. Clicking Restore will restore the static
router port settings to default.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
43
Advertisement
Table of Contents
