Table of Contents
Advertisement
TRENDnet User's Guide
Enable or disable SNMP and modify idle timeout settings
System > User Interface
This section explains how to enable SNMP on the switch and modify the
switch management page idle timeout settings.
Note: If you disable the SNMP on the switch, the switch will not be manageable via
SNMP using MIBs.
Status Settings
SNMP Agent: Click the drop-down list to one of the following
options.
Enabled: The SNMP agent is active. You can
manage the switch with SNMP network
management software and the switch's private
MIB.
Disabled: The SNMP agent is inactive.
Web Server
Displays the current SNMP status.
Status:
© Copyright 2015 TRENDnet. All Rights Reserved.
Timeout Settings
Web Idle
Enter the idle period in minutes, when the switch
Timeout:
will automatically log out an idled user from the
switch management page. Default: 10 min.
Group Interval: The IGMP group timeout interval. Default: 120
sec.
Click Apply to apply the change to the switch
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
18
Advertisement
Table of Contents
