Table of Contents
Advertisement
TRENDnet User's Guide
Bandwidth Control
Configure Storm Control
Bridge > Bandwidth Control > Storm Control
This section allows you to configure the DLF (Destination Lookup Failure),
broadcast, and multicast storm settings for each switch port.
Storm Control Settings
Port: The port ID you want to implement the storm
control.
DLF: Destination Lookup Failure: Click the drop-down
list and select Enabled to enable DLF storm control.
Broadcast: Click the drop-down list and select Enabled to
enable broadcast storm control.
© Copyright 2015 TRENDnet. All Rights Reserved.
Multicast: Click the drop-down list and select Enabled to
enable multicast storm control.
Threshold: Enter the pps (packets per second) threshold.
Action: Modifying settings in the row marked All, will apply
the settings to all ports. Click Apply to apply the
change.
Go Save Settings to Flash section to save the change on the flash to make
sure the change is permanent.
TPE-4840WS
44
Advertisement
Table of Contents
