Table of Contents
Advertisement
TRENDnet User's Guide
3. Open your web browser, and enter the IP address of the switch, and
then press Enter. The default IP address is 192.168.10.200.
4. Enter the User Name and Password, and then click Login. The default
username is admin and the password is admin as well. The username
and password are case sensitive, please enter them in all lower cases.
5. Click System and then click IPv4 Setup.
© Copyright 2015 TRENDnet. All Rights Reserved.
6. Configure the switch IP address settings to be within your network
subnet, then click Apply.
Note: You may need to modify the static IP address settings of your computer's
network adapter to IP address settings within your subnet in order to regain
access to the switch.
To store the change to flash memory so you can access the same switch
management IP address, please follow the instruction below.
7. Click Save Settings to Flash on the bottom of the menu.
8. Click
Note: Once the settings are saved, you can connect the switch to your network.
TPE-4840WS
button, then click OK.
7
Advertisement
Table of Contents
